5.0 Coyote GEN 3 Ford Crate Engine with 6R8OW Auto Transmission 4 X 4 – Bronco Trucks
This is the Complete GEN 3 Ford Coyote Engine and Automatic Transmission Package. Ideal for a F100 or Early 66-77 Bronco. Plug n Play. Includes: Pulleys with Alternator, Wiring harness, Plastic Engine Cover, Computer, Wiring Harness, Fuel Rails and Starter.
We are offering 5.0 Coyote GEN 3 Ford Crate Engine w/ 6R80W Auto Trans 4 X 4 – Bronco / Trucks in a very complete package , please check the Product specifications and if you have any questions feel free to contact us.
- 5.0L (302 cubic inches)
- 12.0:1 compression ratio (nominal)
- Hyperuetectic pistons with Graphal® low friction coating Piston-cooling jets, optimized oil drainback, and windage control improve high-rpm performance
- Manley® H-beam connecting rods with ARP® 2000 bolts
- Clevite connecting rod bearings
- Lightweight aluminum cylinder block, features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength
- Large rear sump Retrofit oil pan with 10qt capacity features optimized oil drainback and windage tray to control oil and improve high-rpm performance
- Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body
- Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction with Boss Valve Springs
- Ford Racing engine cover kit
- The Ford Racing “Coyote” Engine Control Pack includes a PCM with Ford Racing calibration, Electronic Throttle Control accelerator pedal, a unique downsized power distribution module, Air box with inlet tube, MAF sensor with bolts, and EGO sensors.
- Front Timing Cover
- Includes colder heat range zero (0) spark plugs,
- Includes Ford Racing oil filter
- Automatic Flexplate
- Vehicle harness and PCM included, designed for street rod/project car installation.
- Remote Mount Filter Adapter available for applications requiring oil filter relocation
- Engine mount bosses and bellhousing mount pattern common to 4.6L modular engines.
- Includes Alternator Kit with Brackets and Pulleys. ( A/C and P/S available for Additional $)
- Complete 6R80W Automatic Transmission & controller. Advanced Adapters 4 x 4 output shaft, compatible with Dana 20 Transfer Case. Includes Torque Converter, Spacer Plate & Diptube .
- High Torque Starter
|1979-1993||Factory Five||Hot Rod|