5.0 Coyote / 435 HP Fox Body Swap

The New generation Coyote motor  Includes Wiring Harness and ECU.  Can be Installed into the Fox Body Mustang with modifications to Exhaust, mounts, K member etc.  Mustang Coyote Swap Available with Front Drive Accessory Kit – Alternator, Power Steering or A/C where applicable.  More Swap Details Here.


Product Enquiry
  • 5.0L (302 cubic inches)
  • 11.0:1 compression ratio (nominal)
  • Mahle® Hard Anodized  forged pistons with Graphal® low friction coating
  • Manley® H-beam connecting rods with ARP® 2000 bolts
  • BOSS 302 connecting rod bearings
  • Lightweight aluminum cylinder block,   features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength
  • Large rear sump oil pan with 8qt capacity features optimized oil drainback and windage tray to control oil and improve high-rpm performance
  • Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body
  • Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction with Boss Valve Springs
  • Ford Racing engine cover kit and Balancer.
  • Automatic Flexplate. ( Additional Charge for Std. Flywheel)
  • Includes engine injector harness and ECU
  • Front Cover Installed and Harmonic Balancer
  • Includes colder heat range zero (0) spark plugs,
  • Includes Ford Racing oil filter
  • Vehicle harness and PCM  included. This installation kit designed for street rod/project car installation.
  • Remote Mount Filter Adapter  available for applications requiring oil filter relocation


Get More Info